SILENCER - Commercial Pro ModeL

Promotes Efficient Flow! No need to
Re-Set the Bars for each Additional Animal.

"My figures indicate a choke only once in about 2,000 head using the SILENCER Chute
and I have never lost an animal to choking with SILENCER! In contrast, I have
observed scissor-gated chutes at feedlots that cause choking on 5% of the
animals, likely resulting in a $20,000 yearly loss in just time alone for a large feedlot."
--John Brethour, Ultrasound Technology, KSU Ag Research; Hays, KS

SILENCER Commercial Pro Model


Extended Length Commercial Pro Model SILENCER.	Regular Length Commercial Pro Model SILENCER pictured with Overhead Scales.

SILENCER Commercial Pro Model is fully sheeted, full-opening head and taildoors, wedge taildoors, mainframe 4x3x5/16 inches and 4x2x5/16 inch rectangular tubing, 2x2 sq., 1/4 inch wall sidegates, high test 1/4 inch floor plate, reinforced construction, modular construction for superior maintenance, replaceable heavy duty drop bars, extra neck access sidegates, rocker shaft roller bearings, 8 quick-change, relube roller bearings on top connector, oil based urethane bearings, standard 3 spool hydraulic valves, 6--4x2 cylinders, 1--6" cylinder, 8--greaseable sealed bearings on main rockshaft linkage pivot points, main cylinder pins greaseable, lower cylinder access doors, fitted hoses, 30 ft. extension hose, chute primed before painted.

The Commercial Pro SILENCER is for large volume cattle operations. Overhead Modular Scales exclusively for SILENCER promote longer scale life and easier clean-up. The Overhead Scales are available for standard length SILENCER's, Extended Models and the Trans2 Portable System

Each Chute comes with a One Year Warranty.

Additional Options:

	Pivot Controls
	Extended Commercial Pro Model
	Rubber-Belted Louvers on Sidegates
	Side Exit - Left and/or Right Side
	Hydraulic Lower Squeeze
	Hydraulic Head Restraint
	Rear Walk-Through Door (26 inches)
	Adjustable Neckbars
	De-Horner Head Restraint
	Platform or Overhead Electronic Scales
	Yoke, Carry-All or Overhead Carriers
	Rebar Floor
	Power Supply Options: 5 HP Electric Hydraulic Pump Baldor Industrial Motor - 1 phase or 3 phase with vane pump and pressure relief valve.
	Gas Powered HPV 550 Hydraulic Pump: Honda 6.5 HP engine hydraulic pump, two spool valve with pressure relief, reservoir, oil filter, quick couplers (female).

Commercial Pro Model SILENCER Specifications:

Weight without Pump: 3520 lbs.

SILENCER Electric Pump Weight: 235 lbs.

Overall Height: 93''

Head & Taildoor Height: 67 1/2''

Inside Chute Height: 67 1/2''

Overall Outside Length: 102''

Overall Inside Length: 91''

Total Width Doors Open: 67''

Total Width Doors Closed: 59'' (Including Hydraulic Levers)

Original Manufacturer of Hydraulic Livestock Equipment, World-Wide Direct Sales, Customer Technical Support.

Moly Manufacturing, Inc.
2435 10th Rd. • P.O. Box 80
Lorraine, KS 67459 USA
Phone: (785) 472-3388 • Fax (785) 472-2530
Hours: Monday-Friday 7:00 a.m. - 4:00 p.m. Central
Email: support@molymfg.com

All rights reserved, including the right to reproduction in whole or in part, without written permission.